Removal (Dakota - With Rear Drums)
- Raise and support vehicle.
- Remove the rear wheel and tire assemblies.
- Loosen tensioner adjuster nut.
- Remove the right cable from the extension cable. See Fig 1.
- Remove the right cable from the frame clip and pull the cable housing through the left cable connector.
- Remove the left cable connector from the left cable.
- Pull both cables through the cable bracket. See Fig 1.
- Remove the right cable mounting retainers from the differential housing.
- Remove the brake drums.
- Disconnect each cable from park brake lever.
- Compress tabs on each cable housing retainer at the brake support plate.
- Remove the cables from the brake support plates.
Courtesy of CHRYSLER CORP.