LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Tail Lamp Unit >> Installation

Tail Lamp Unit: Installation

  1. Position the tail lamp on vehicle.
  2. Engage the wire connector into the tail lamp circuit board.
  3. Engage the positive lock on the wire connector.
  4. Engage the hook to hold outer end of the lamp to the quarter panel opening.
  5. Install the screws attaching tail lamp to the liftgate opening.
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals