LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the license plate lamp from the rear bumper.
  3. Remove the bulb socket from the lamp.
    Fig 1: Removing License Plate Lamp Bulb
    G02660175Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the bulb.
scientia non olet · About LEMON Manuals