LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Brake Lamp Switch >> Removal

Brake Lamp Switch: Removal

  1. Disconnect the switch harness.
    Fig 1: Removing Brake Lamp Switch & Bracket
    G02660162Courtesy of DAIMLERCHRYSLER CORP.
  2. Press and hold the brake pedal in applied position.
  3. Rotate the switch counterclockwise about 30° to align the switch lock tab with the notch in bracket.
  4. Pull the switch rearward out of the mounting bracket and release the brake pedal.
scientia non olet · About LEMON Manuals