LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Neon Base, Automatic >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Parking Brake Shoes >> Removal

Parking Brake Shoes: Removal

  1. Raise the vehicle.
  2. Remove the rear tire and wheel assembly.
  3. Remove the rear disc brake caliper from the brake rotor. See CALIPER  .
  4. Remove the rear brake rotor. See ROTOR  .
  5. Remove the dust cap from the rear hub and bearing.
  6. Remove the rear hub and bearing assembly retaining nut and washer.
  7. Remove the rear hub and bearing assembly from the rear spindle.
  8. Remove the rear parking brake shoe assembly hold-down clip. See Fig 1 .
  9. Turn the brake shoe adjuster wheel until the adjuster is at its shortest length.
  10. Remove the adjuster assembly from the parking brake shoe assemblies. See Fig 2 .
  11. Remove the parking brake shoe lower return spring. See Fig 3 .
  12. Pull the rear brake shoe away from anchor. Remove the rear brake shoe and upper return spring. See Fig 4 .
  13. Remove the front brake shoe hold-down clip. See Fig 5 . Remove the front brake shoe assembly.
Fig 1: Removing & Installing Rear Parking Brake Shoe Hold-Down Clip
G00309451Courtesy of CHRYSLER CORP.
Fig 2: Removing & Installing Parking Brake Shoe Adjuster
G00309452Courtesy of CHRYSLER CORP.
Fig 3: Removing & Installing Parking Brake Shoe Lower Return Spring
G00309453Courtesy of CHRYSLER CORP.
Fig 4: Removing & Installing Rear Parking Brake Shoe & Upper Return Spring
G00309454Courtesy of CHRYSLER CORP.
Fig 5: Removing & Installing Front Hold-Down Clip & Front Parking Brake Shoe
G00309455Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals