LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Neon Base, Automatic >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Lamp Switch >> Removal (PT Cruiser)

Removal (PT Cruiser)

  1. Unclip the air cleaner cover (2 clips) and move the cover aside.
  2. Disconnect and isolate the negative battery cable.
  3. Remove the silencer pad below the knee blocker.
  4. Fold down and remove the knee blocker below the steering column.
  5. Remove the brake lamp switch from its bracket by rotating the switch in a counterclockwise direction about 30 degrees, then pulling the switch rearward.
  6. Disconnect the wiring harness connector.
  7. Discard the brake lamp switch. Switch must not be reused.
scientia non olet · About LEMON Manuals