LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Neon Base, Automatic >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Fluid Level Switch >> Installation

Brake Fluid Level Switch: Installation

  1. Align the brake fluid level switch with its mounting hole on the left side of the master cylinder brake fluid reservoir. Push the switch into the fluid reservoir until the switch retaining tabs are expanded on the other side of the reservoir, locking it in place. See Figure .
  2. Connect the brake fluid level switch wiring connector.
scientia non olet · About LEMON Manuals