LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Intrepid SE, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Power Door Locks/RKE - Symptoms >> Symptom: DECKLID RELEASE SWITCH FAILURE >> When Monitored and Set Condition

When Monitored and Set Condition

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: Continuously.

Set Condition: The BCM monitors voltage present on the decklid release switch output circuit. If voltage is present for over 30 seconds, this DTC will set.