Intermittent Simulation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Dodge Stratus, 2003 Dodge SX, 2003 Dodge SRT-4, 2003 Dodge Neon, and 2003 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
To reproduce the conditions creating an intermittent fault, use the following methods:
- Lightly vibrate component.
- Heat component.
- Wiggle or bend wiring harness.
- Spray component with water.
- Remove/apply vacuum source.
Monitor circuit/component voltage or resistance while simulating intermittent. If engine is running, monitor for DTCs. Use test results to identify a faulty component or circuit.