Crankshaft Position Sensor: Removal
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft Position (CKP) sensor is located on top of passenger's side of transaxle, just above differential housing. See Figure. The bottom of the sensor sits above the drive plate. Disconnect CKP sensor harness connector. Remove sensor mounting bolt and CKP sensor.