Crankshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
The crankshaft sensor is located on the passenger side of the transmission housing, above the differential housing. The bottom of the sensor sits above the drive plate. Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt. See TORQUE SPECIFICATIONS . Connect electrical harness connector to CKP.