LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Intrepid SE, 2.7 R >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Controls - Removal, Overhaul & Installation) >> Sensors & Switches >> Camshaft Position Sensor >> Installation (2.7L)

Installation (2.7L)

WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install CMP sensor in timing chain cover. Push CMP sensor fully downward against timing chain cover.
  2. Install and tighten CMP sensor bolt to specification while holding CMP sensor downward. See TORQUE SPECIFICATIONS . Install CMP sensor harness connector.
scientia non olet · About LEMON Manuals