Brake Switch: Removal
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Depress and hold the brake pedal.
- Remove the brake switch from it's bracket. See Fig 1 and Figure . To do so, rotate the brake lamp switch in a counterclockwise direction approximately 30° from its proper mounting position. Pull the switch rearward and remove it from it's mounting bracket.
- Disconnect the wiring harness connector from switch.