Removal & Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Disconnect negative cable battery at remote battery terminal on passenger's side strut tower. From behind front bumper, remove retaining screw for ambient temperature sensor from radiator core support.
- Disconnect electrical connector and remove ambient temperature sensor. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .