Removal (Plastic Retainer Ring Fittings)
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Release fuel pressure from fuel system. See FUEL SYSTEM PRESSURE RELEASE .
- Disconnect negative battery cable at remote battery terminal on passenger's side strut tower. Ensure disconnect fitting and fuel lines are clean. Push plastic retainer ring and disconnect fitting from fuel line. See Figure. Inspect components for damage. If disconnect fitting is damaged, entire assembly must be replaced.