Monitored & Set Conditions
WARNING: This page is about a different car, the 2004 Chrysler Intrepid, 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Speed control switch signal circuit is monitored with ignition and battery voltage above 10 volts. DTC will set if the PCM detects an open or short to voltage in the speed control switch signal circuit. DTC is a one trip fault.