Monitored & Set Conditions
WARNING: This page is about a different car, the 2004 Chrysler Intrepid, 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position (CMP) sensor signal is monitored with engine cranking or running. DTC will set when at least 5 seconds or 2.5 revolutions have elapsed with Crankshaft Position (CKP) sensor signals present but no signal from CMP sensor. This is a one trip fault.