Monitored & Set Conditions
WARNING: This page is about a different car, the 2004 Chrysler Intrepid, 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft position sensor signal circuit is monitored with engine cranking. DTC will set when no signal from the crankshaft position sensor is present during engine cranking, and at least 8 camshaft position sensor signals have occurred.