Monitored & Set Conditions
WARNING: This page is about a different car, the 2004 Chrysler Intrepid, 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Closed loop operation is monitored after engine is started and battery voltage is greater than 10.4 volts. DTC will set when engine temperature does not enable closed loop. failure time depends on start-up coolant temperature and ambient temperature. (i.e. 2 minutes for a start up temp of 50°F (10°C) or up to 10 minutes with a start up temp of 19°F (-28°C). This is a two trip fault.