Monitored & Set Conditions
WARNING: This page is about a different car, the 2004 Chrysler Intrepid, 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
The crankshaft/camshaft timing misalignment is monitored when the ignition is on and the engine is cranking or running. DTC will set if the Powertrain Control Module (PCM) detects an error when the camshaft position is out of phase with the crankshaft position.