Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Brake Rotor

Diameter

⁽¹⁾

Original Thickness

Front

.939-.949 (23.85-24.10)

Rear

.482-.502 (12.24-12.29)

Minimum Finish Thickness⁽²⁾

Front

.881 (22.38)

Rear

.443 (11.25)

Runout

Front (1998 Models)

.003 (.08)

Rear (1998 Models)

.003 (.08)

Front (1999 Models)

.004 (.102)

Rear (1999 Models)

.0055 (.140)

Thickness Variation

.0005 (.013)

Front Hub Assembly Runout

.003 (.08)

⁽¹⁾	Information is not available from manufacturer.

⁽²⁾	Minimum refinish thickness is marked on front of brake rotor. If specification differs from specification listed, use specification marked on brake rotor.