Calibration Test
CHEC-1 will be displayed in odometer window. Each of instrument cluster gauges will move sequentially through each calibration point. See GAUGE CALIBRATIONS table. If gauge needle is not calibrated properly, a problem in instrument cluster exists. See BODY CONTROL COMPUTER TESTS in BODY CONTROL COMPUTER article for gauge recalibration procedures.
GAUGE CALIBRATIONS
| Gauge Sequence | Calibration Point | |
|---|---|---|
| Speedometer | ||
| 1 | 0 MPH (0 Km/h) | |
| 2 | 20 MPH (40 Km/h) | |
| 3 | 55 MPH (80 Km/h) | |
| 4 | 75 MPH (120 Km/h) | |
| Tachometer | ||
| 1 | 0 RPM | |
| 2 | 1000 RPM | |
| 3 | 3000 RPM | |
| 4 | 6000 RPM | |
| Fuel Gauge | ||
| 1 | Empty | |
| 2 | 1/8 Full | |
| 3 | 1/4 Full | |
| 4 | Full | |
| Temperature Gauge | ||
| 1 | Cold | |
| 2 | Low Normal | |
| 3 | High Normal | |
| 4 | Hot | |