Test 6A - Driver-Side Squib Term Shorted To Ground
WARNING:
Disconnect battery and wait 2 minutes before proceeding.
- Disconnect driver-side air bag module. Turn ignition on and then reconnect battery. Use DRB to read active codes. If DRB shows DRIVER SQUIB TERM SHORTED TO GROUND, go to next step. If not, replace driver-side air bag module.
- Disconnect clockspring 2-way connector. Use DRB to read active codes. If DRB shows DRIVER SQUIB TERM SHORTED TO GROUND, go to next step. If not, replace clockspring.
- Disconnect battery and wait 2 minutes before proceeding. Disconnect air bag control module 4-way connector. Turn ignition on, then reconnect battery. Use DRB to read active codes. If DRB shows DRIVER SQUIB TERM SHORTED TO GROUND, perform TEST 15A - ACM REPLACEMENT PROCEDURE . If not, repair driver-side air bag line 1 or 2 for a short to ground.