Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Caliper Bore Diameter

2.125 (54)

Disc Diameter

⁽¹⁾

Lateral Runout

.005 (.13)

Parallelism (Max Thickness Difference)

.0005 (.0130)

Original Thickness

.900-911 (22.87-23.13)

Minimum Refinish Thickness ⁽²⁾

.843 (21.4)

Discard Thickness

.813 (20.64)

Master Cylinder Diameter

⁽³⁾ .874 (22.20)

⁽¹⁾	Information not available at time of publication.

⁽²⁾	Minimum refinish thickness may be marked on disc. If different from specified thickness, use disc marking.

⁽³⁾	Service to bore not recommended.