LEMON Manuals: Even more car manuals for everyone

Home >> Dodge and Ram >> 1988 >> Caravan Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.5L 4-CYL - VIN [K] >> Overhaul >> Rear Main Bearing Oil Seal >> Installation

Rear Main Bearing Oil Seal: Installation

Lightly coat outside diameter of new oil seal with Loctite (4057987). Using Oil Seal Installer (C-4681), tap seal into place using plastic hammer.

scientia non olet · About LEMON Manuals