LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1988 >> Caravan Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Voltmeter Gauge

Voltmeter Gauge

  1. Remove voltmeter and seat belt indicator (if equipped). Connect voltmeter positive lead to the "B +" terminal and negative lead to ground pin.
  2. Turn ignition on and note reading. Battery voltage should be obtained. Replace voltmeter if voltage exists. Check wiring and printed circuit for continuity if no voltage exists.
scientia non olet · About LEMON Manuals