LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1982 >> Colt Base, 2D Hatchback >> Repair and Diagnosis >> Electrical >> Gauges >> Switches, Gauges & Instrument Panels CHRYSLER Corp. >> Adjustment >> Stop Light Switch >> All Models (Except Aries, LeBaron, Reliant & 400)

All Models (Except Aries, LeBaron, Reliant & 400)

  1. Loosen switch assembly screw. Press brake pedal down and release. Place a 0.130" spacer gauge against pedal-to-switch surface.
    NOTE: Do not pull brake pedal back at any time.
  2. Press switch against spacer until plunger is fully depressed. Tighten switch mounting screw, remove spacer, and check switch operation.
scientia non olet · About LEMON Manuals