LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1979 >> Colt Custom >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sun & Moon Roofs - Electric >> Removal & Installation >> Sliding Panel, Halo Moulding Or Sun Shade >> Removal (General Motors - Halo Moulding)

Removal (General Motors - Halo Moulding)

  1. Slide sun shade to full open position, open glass to half open position and remove 3 screws from front of halo moulding.
  2. Close roof panel to within 3" of fully closed position and deflect front center of halo moulding down so that tabs at front of moulding are removed from track mechanism.
  3. Fully close roof and slide moulding forward. Deflect center rear of moulding, remove track slide surface from track. Slide halo moulding forward to remove.
scientia non olet · About LEMON Manuals