LEMON Manuals: Even more car manuals for everyone
Home >> Daewoo >> 2000 >> Nubira SE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Diagnosis >> Lining Inspection - Rear Disc Brake

Lining Inspection - Rear Disc Brake

  1. Raise and support vehicle. Remove rear wheels. Visually check linings for minimum thickness and wear. Measure thickness.
    NOTE: The minimum thickness of lining is 2.0 mm (0.08").
  2. Install shoe and linings in axle sets only. Install rear wheels. Lower vehicle.
scientia non olet · About LEMON Manuals