LEMON Manuals: Even more car manuals for everyone
Home >> Daewoo >> 2000 >> Nubira SE, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Diagnosis >> Lining Inspection - Front Disc Brake

Lining Inspection - Front Disc Brake

  1. Raise and support vehicle. Remove front wheels. Visually check linings for minimum thickness and wear. Measure thickness.
    NOTE: The minimum thickness of inner or outer pad is 7 mm (0 28").
  2. Install brake pads in axle sets only. Install front wheels. Lower vehicle.