Brake Specifications
General Specifications (1 Of 2)
| Application | 2.0 DOHC Engine | |
|---|---|---|
| Millimeters | Inches | |
| Brake Drums: | ||
| Inside Diameter | 200 | 7.87 |
| Maximum Rebore Diameter | 201 | 7.91 |
| Out-of-Round | 0.08 | 0.0032 |
| Front Brake Rotors: | ||
| Discard Thickness | 22.00 | 0.87 |
| Lateral Runout (Installed) | 0.030 | 0.001 |
| Rotor Diameter | 256 | 10.07 |
| Rotor Thickness | 24.00 | 0.95 |
| Thickness Variation | 0.005 | 0.0005 |
| Rear Brake Rotors: | ||
| Discard Thickness | 8.4 | 0.33 |
| Lateral Runout (Installed) | 0.03 | 0.001 |
| Rotor Diameter | 258.00 | 10.16 |
| Rotor Thickness (New) | 10.40 | 0.41 |
| Thickness Variation | 0.005 | 0.0005 |
| Master Cylinder: | ||
| Bore Diameter (Nominal) | 22.22 | 0.937 |
| Bore Diameter (Maximum) | 22.29 | 0.937 |
General Specifications (2 Of 2)
| Application | 2.0 DOHC Engine | |
|---|---|---|
| Millimeters | Inches | |
| Caliper: | ||
| Minimum Piston Diameter (Front) | 57.00 | 2.244 |
| Minimum Piston Diameter (Rear) | 35.00 | 1.377 |