Description & Operation: Headlamps

The headlamps are controlled by multifunction lever on left side of steering column. They will come on with ignition switch in any position. Turning headlamp switch to first position turns on parking lamps, license plate lamps, and instrument panel illumination. Turning switch to second position turns on all of previous lamps and headlamps. Turning switch OFF turns off all lamps.

The headlamps high beam and low beams are also controlled by this lever. When headlamps are on, pushing lever away from driver until switch clicks changes lamp from low beam to high beam. An indicator lamp on instrument cluster assembly will come on when high-beam headlamps are on. To return headlamps to low beams pull lever toward driver.

The headlamps must be aimed for proper illumination of road. Headlamp aim should be checked whenever a new headlamp assembly is installed or when service or repairs to front end may have disturbed headlamp assembly or its mountings.