LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2023 >> Pacifica Limited, FWD, Gas >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body - Interior & Exterior (1 Of 3) >> Body Structure >> Gap And Flush >> Specifications

Gap And Flush: Specifications

GC0178343Courtesy of CHRYSLER GROUP, LLC
NOTE:

All dimensions are in millimeters.

DIMENSION DESCRIPTION GAP FLUSH
1 Hood to Grill Varies +/- 2.0 Inboard -
2 Upper Fascia Applique to Headlamp 2.5 +/- 1.0 U/D
2.5 +/- 1.5 Cross Car		 Applique O/F Inboard 4.0 +/- 1.5
Transition to U/F Outboard 4.0 +/- 1.5
3 Upper Fascia Applique to Hood Outboard 7.0 +/- 1.5 Applique U/F 5.0 +/- 1.5
4 Windshield to Body Side Aperture 4.0 +/- 2.0
0.0 to seal		 -
5 Windshield to Roof 4.0 +/- 1.5
0.0 to seal		 Windshield U/F 1.5+/- 1.5
Transition to 2.0 +/- 1.5 Outboard
6 Front Power Sunroof Glass to Roof 0.0 to seal Front Sunroof Glass U/F 1.5 +/- 1.5
Consistent within 1.0
7 Front Power Sunroof Glass to Fixed Sunroof Glass 0.0 to seal Front Sunroof Glass O/F 1.5 +/- 1.5
Consistent within 1.0
8 Fixed Sunroof Glass to Roof 0.0 to seal Front Sunroof Glass O/F 1.5 +/- 1.5
9 Rear Fixed Sunroof Glass (front) to Roof 0.0 to seal Rear Sunroof Glass U/F 1.5 +/- 1.5
10 Rear Fixed Sunroof Glass (rear) to Roof 0.0 to seal Rear Sunroof Glass O/F 1.5 +/- 1.5
11 Liftgate to Roof 7.0 +/- 1.0
Parallel within 1.0		 Liftgate U/F 1.5 +/- 1.0
Consistent within 1.0
12 Liftgate to Body Side Aperture 4.0 +/- 1.0
Parallel within 1.0		 Liftgate U/F 5.0 +/- 1.0
13 Fuel Door to Body Side Aperture 2.5 +/- 1.0
Consistent within 1.0		 Fuel Door U/F 1.0 +/- 1.0
Consistent within 1.0
Character line 0.0 +/- 1.0
14 Body Side Aperture to Sill Molding 1.0 +/- 0.0 Body Side Aperture O/F 0.5 +/- 1.0 at front
Transition to 0.0 at rear
15 Sliding Door to Sill Molding 4.0
Parallel within 1.5		 Sliding Door O/F 0.5 +/- 1.0
16 Sliding Door to Sill Molding 4.5 +/- 1.5
Parallel within 1.5		 Sliding Door U/F 5.0 +/- 1.5
17 Front Door to Sill Molding 4.5 +/- 1.5
Parallel within 1.5		 Front Door U/F 2.0 +/- 1.5 at front
Transition to 6.0 at rear
18 Fender to Front Door 4.0 +/- 1.0
Parallel within 1.0		 Fender O/F 0.5 +/- 1.0 below character line
0.0 +/- 1.0 at top
19 Fascia to Fender 0.0 +/- 0.5 Fascia U/F 0.5 +/- 0.5
20 Headlamp to Fender 1.0 +/- 1.0 Lamp U/F 1.0 +/- 1.0 at top
Transition to U/F 1.5 at Fascia
21 Headlamp to Fascia 1.0 +1.5/- 1.0
Consistent within 1.5		 Lamp U/F inboard 3.5 +/- 1.0
Transition to 6.0 to 1.0 outboard
22 Fog Lamp to Fascia 1.0 +/- 0.5 Lamp U/F inboard 15.0 +/- 1.0
Transition to 11.0 +/- 1.0 outboard
23 Lower Grill to Fascia 0.5 +/- 0.5 Grill U/F 3.0 +/- 1.0
24 Lower Fascia Applique to Fascia 0.5 +/- 0.5 Applique O/F 8.5 +/- 1.0
25 Upper Grill to Fascia 0.5 +/- 0.5 -
26 Liftgate Lamp to Liftgate 1.5 +/- 1.0
Parallel within 1.0		 Lamp O/F 4.5 +/- 1.0 at lower outboard
27 Liftgate Lamp to Liftgate Glass 4.0 +/- 1.5
Parallel within 1.5		 Lamp O/F 2.5 +/- 1.5 outboard
Transition at top Lamp 0.0 outboard
28 Liftgate Applique to Liftgate Glass 4.0 +/- 1.5
Parallel within 1.5		 Applique O/F 1.5 +/- 1.5
Consistent within 1.5
29 Liftgate Lamp to Liftgate Applique 1.0 +/- 1.0
Consistent within 1.0		 Lamp O/F 1.5 +/- 1.5
30 D-pillar Applique to Liftgate Glass 5.5 +/- 1.5
Parallel within 1.5		 Applique U/F 0.0 +/- 1.5 at top
Transition to Lamp U/F 0.5 to 0 at bottom
Consistent within 1.5
31 D-pillar Applique to Body Side Aperture 1.5 +/- 1.0
Consistent within 1.0		 Applique U/F 2.0 +/- 1.0 at top
Transition to O/F 1.5 +/- 1.0 at bottom
32 Quarter Glass Molding to Body Side Aperture 0.0 to seal Varies +/- 1.5
33 Body Side Aperture to Sliding Door (Front and Rear) 5.5 +/- 1.5 (front only)
Transition to 4.0
Parallel within 1.5		 Front and rear 0.0 +/- 1.5
Consistent within 1.5
34 Body Side Aperture to Sliding Door (Center) 4.0 +/- 1.5
Parallel within 1.5		 1.0 +/- 1.5
Body Side Aperture U/F 1.0
Consistent within 1.5
35 Front Door Molding to Sliding Door Molding 5.0 +/- 1.5 0.0 +/- 1.5
Consistent within 1.5
36 Front Door Window Molding to Body Side Aperture 0.0 to seal Molding U/F 3.0 +/- 1.5 at front
Transition to U/F 2.0 at rear
37 Hood to Fender 3.5 +/- 1.0
Parallel within 1.0
Side to side within 1.5		 Hood U/F 1.0 +/- 1.0
Transition to 2.0 at incline and 1.0 at rear
38 Fender to A-pillar 2.0 +/- 1.0
Parallel within 1.0
Side to side within 1.0		 0.0 +/- 1.0
39 Front Door Applique to Sliding Door Front Applique 5.0 +/- 1.5
Parallel within 1.5		 0.0 +/- 1.5
Consistent within 1.5
40 Fender to Sill Molding 2.0 +/- 1.0
2.5 at notch		 0.0 +/- 1.0 at front
Transition to Fender U/F 1.5 at rear
41 Front Door to Sliding Door 5.0 +/- 1.0
Parallel within 1.0		 Front Door O/F below character line 0.5 +/- 1.0
Front Door above character line 0.0 +/- 1.0
42 Sliding Door Rear Applique to Quarter Glass 5.5 +/- 1.5
Parallel within 1.5
0.0 to seal		 Applique O/F 3.5 +/- 1.5
Consistent within 1.5
43 Sliding Door to Body Side Aperture 4.0 +/- 1.0
Parallel within 1.0		 Sliding Door O/F below character line 0.5 +/- 1.0
Sliding Door above character line 0.0 +/- 1.0
44 Body Side Aperture to Rear Fascia F/A and U/D 0.0 to 0.5 Fascia at Taillamp U/F 0.5 +/- 0.5
Transition to 0.0 at Wheelhouse
45 Tail Lamp to Body Side Aperture 1.5 +/- 1.0
Consistent within 1.0		 Lamp O/F 4.0 +/- 1.0 at inboard
Transition to 4.5 to 4.0 at top
46 Tail Lamp to D-pillar Appllique 4.0 +/- 1.5
Parallel within 1.5		 Lamp Varies +/- 1.5
47 Tail Lamp to Liftgate Lamp 4.5 +/- 1.5
Parallel within 1.5
Side to side within 2.0		 0.0 +/- 1.5 at top
Transition to Tail Lamp O/F 1.0 to 0.0 at bottom
48 Liftgate to Rear Fascia 4.0 +/- 1.5
Parallel within 1.5		 -
49 Rear Fascia Applique to Lower Fascia 0.5 +/- 0.5 Applique U/F 1.0 +/- 1.0 (Single Exhaust)
Applique O/F inboard 15.5 +/- 1.0 transition to 3.5 outboard (Dual Exhaust)
50 Rear Liftgate to Upper Fascia 4.0 +/- 1.5
Parallel within 1.5		 -
51 Rear Liftgate to Upper Fascia 5.5 +/- 1.5 0.0 at top
Transition to Fascia O/F 3.0 at bottom
scientia non olet · About LEMON Manuals