Clutch, C: Disassembly

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

1. Wave plate

2. Friction plate

3. Backing plate

4. Steel plate

Courtesy of CHRYSLER GROUP, LLC

Place clutch C (2) in a suitable press.
Using special tool 8680 (1), compress the clutch C (2) enough to remove the snap ring (3).
Remove the snap ring (3).

Courtesy of CHRYSLER GROUP, LLC
Remove the clutch C retainer (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the clutch C piston (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the belleville spring (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the wave plate (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the 6 clutch C friction and steel plates (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the clutch C backing plate (1).

Courtesy of CHRYSLER GROUP, LLC
Separate the clutch C clutch shaft (3) from the clutch hub (1).
Remove two O-rings from the clutch C shaft (2).