LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2020 >> 300 C >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (8HP50/850RE Automatic Transmission (Service Information)) >> Cable, Manual Park Release >> Installation

Cable, Manual Park Release: Installation

WARNING: This page is about a different variant/trim than selected.
GC0152190Courtesy of CHRYSLER GROUP, LLC
  1. Install the Manual Park Release (MPR) cable (2) in the vehicle. Install the MPR cable bracket bolts (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
    GC0152189Courtesy of CHRYSLER GROUP, LLC
  2. Connect the MPR cable (1) to the MPR lever (2).
  3. Remove the support and lower the vehicle.
    GC0152223Courtesy of CHRYSLER GROUP, LLC
  4. Connect the MPR cable (2) to the MPR lever.
  5. Connect the MPR cable (1) to the housing.
  6. Install the MPR cover.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals