LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2020 >> 300 C >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 ((Electronic Shift Module (ESM) - Electrical Diagnostics - 8HP50/850RE Automatic Transmission)) >> DTC Troubleshooting >> U1175-00-Lost Ignition Status Message

U1175-00-Lost Ignition Status Message

WARNING: This page is about a different variant/trim than selected.
NOTE:

This DTC indicates a communication issue has occurred between the Sending  control module (Body Control Module - BCM) and the Reporting  control module(s) that set this fault.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .