Daytime Running Lamps (DRL)

Vehicles equipped with this option or manufactured for sale in Canada illuminate multiple LED units in both front lamp units when the engine is running, the parking brake is released and the exterior lamps are turned OFF. The BCM must be programmed appropriately for this feature to be enabled. Once enabled, anytime the BCM receives electronic messages over the CAN data bus from the PCM indicating the engine is running, a hardwired multiplex input from the headlamp switch indicating the status of the headlamp switch is OFF and a hardwired input from the park brake switch indicating that the parking brake is released, the BCM provides an output to the appropriate LED units to produce illumination. If a turn signal is activated while the DRL units are active, the DRL for the same side of the vehicle as the indicated turn is extinguished until the turn signal is cancelled to permit clear signal visibility. Hazard Warning flashes these LED units.