Panel, Seat Back, Front: Removal
WARNING:
Review all warnings and cautions prior to servicing the seats. Failure to follow these instructions may result in serious or fatal injury.
Refer to SEATS, FRONT, WARNING .
- Position the seat fully forward.
- Disconnect the negative battery cable.
- Release the two J-hooks (1) at the bottom of the seat.
- Starting at one side of the seat back panel (2), use a trim stick (1) or equivalent to push inward at the locations shown in the illustration (3) to release the retaining tabs, and pull rearward on the seat back panel.
- Release the retaining tabs on both sides of the seat back panel, then lift the seat back panel to remove.