LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2018 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Lamp, License Plate >> Removal >> Bulb

Lamp, License Plate: Removal: Bulb

GC0144690Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the license plate lamp from the rear fascia.
  3. Pull the base of the bulb (2) straight out of the socket (1).
scientia non olet · About LEMON Manuals