LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Pod, Switch >> Removal >> Removal

Pod, Switch: Removal: Removal

Fig 1: Removing/Installing Assembly Switch Bank Module (ASBM)
GC0121012Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel (3). Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
  3. Remove the four screws (1) to the accessory switch bank module (2).
scientia non olet · About LEMON Manuals