LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Pod, Switch >> Installation >> Installation

Pod, Switch: Installation: Installation

Fig 1: Removing/Installing Assembly Switch Bank Module (ASBM)
GC0121012Courtesy of CHRYSLER GROUP, LLC
  1. Position the accessory switch bank module (ASBM) in the center bezel and install the four screws (1).
  2. Install the instrument panel center bezel (3). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals