Header Weatherstrip
Courtesy of CHRYSLER GROUP, LLC
- Place top into vertical position. Refer to DECKLID/HATCH/LIFTGATE/TAILGATE
.
- Start with one end of the header weatherstrip and lift up to remove weatherstrip from tape (2).
- Carefully remove the weatherstrip by lifting up on the weatherstrip moving down the A-Pillar.
- Carefully remove the header weatherstrip from the retainer going across the header.
- Carefully remove the weatherstrip by lifting up on the weatherstrip moving down the other A-Pillar.
- Remove any foam (1) left on header sheet metal.
- Clean header and A-Pillar.