LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 Limited, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Bumpers >> Fascia, Rear >> Removal >> SEBRING Sedan

SEBRING Sedan

Fig 1: Identifying Rear Fascia
GC0122080Courtesy of CHRYSLER GROUP, LLC
  1. Release decklid latch and open decklid.
  2. Remove three push-in fasteners (1) attaching center of fascia to rear closure panel.
    Fig 2: Splash Shield Fasteners
    GC0122081Courtesy of CHRYSLER GROUP, LLC
  3. Remove two wheelhouse fasteners and pull back splash shields exposing fascia to fender hidden fastener (1).
    Fig 3: Lower Fascia Fasteners
    GC0122082Courtesy of CHRYSLER GROUP, LLC
  4. Remove lower fascia fasteners (2).
  5. Slide fascia rearward to disengage hooks holding fascia to bottom of quarter panel.
  6. Remove fascia from vehicle.