LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 Limited, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Body - Interior & Exterior >> Convertible Top, Convertible Soft Top Unique Components >> Bow, Roof, Number 2 And 3 >> Removal >> Removal

Bow, Roof, Number 2 And 3: Removal: Removal

Fig 1: Number 2 And 3 Bow, Springs & Fasteners
GC0122878Courtesy of CHRYSLER GROUP, LLC
  1. Remove headliner assembly back to the # 3 bow (3). Refer to HEADLINER, REMOVAL  - CONVERTIBLE TOP, CONVERTIBLE SOFT TOP UNIQUE COMPONENTS or HEADLINER, REMOVAL  - CONVERTIBLE TOP, RETRACTABLE HARD TOP UNIQUE COMPONENTS.
  2. Close and latch the Convertible Soft Top (CST) roof to the header.
  3. Disconnect the top cover listing flaps from the # 3 bow.
  4. Disconnect the 2/3 bow springs (4), (one on each side) from the side rail assemblies.
  5. Remove the 2/3 bow brackets fasteners (1), (one on each side) from the side rail assemblies.
    NOTE:

    DO NOT open the CST roof automatically with the 2/3 bow assembly loose from the frame.

  6. Open the roof to the vertical position.
  7. Remove the 2/3 bow assembly from the vehicle.
scientia non olet · About LEMON Manuals