LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2014 >> 200 Limited, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Exterior Lighting - Non-DTC Based Diagnostics >> Diagnosis And Testing >> Diagnosis And Testing - Parking Brake Switch >> Parking Brake Switch >> Indicator Remains Illuminated - Brake System Checks Okay

Indicator Remains Illuminated - Brake System Checks Okay

  1. Disconnect and isolate the battery negative cable. Disconnect the body wire harness connector for the park brake switch from the switch terminal. Check for continuity between the terminal of the park brake switch and a good ground. There should be no continuity with the park brake released, and continuity with the park brake applied. If OK, go to  2. If not OK, replace the ineffective park brake switch.
  2. Disconnect the instrument panel wire harness connector (Connector C2) for the instrument cluster from the cluster connector receptacle. Check for continuity between the park brake switch sense circuit cavity of the body wire harness connector for the park brake switch and a good ground. There should be no continuity. If not OK, repair the shorted park brake switch sense circuit between the park brake switch and the instrument cluster as required.
scientia non olet · About LEMON Manuals