Diagnostic Test

VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE
NOTE:
Make sure the battery voltage is between 10 and 16 volts before proceeding.
1. Turn the ignition on.
2. With the scan tool, read the active DTCs.
  Does the scan tool display: U0001-00-CAN C BUS?
  
  Yes
  - For the DTC U0001-00 CAN C BUS, use the U0002-00 CAN C BUS OFF PERFORMANCE diagnostic procedure.
  - Refer to the DTC INDEX article and perform the U0002-CAN C BUS OFF PERFORMANCE diagnostic procedure.
  No
  - Refer to DIAGNOSIS AND TESTING and perform the STORED LOST COMMUNICATION DTCs diagnostic procedure.