LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 SRT-8 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Lamp, License Plate >> Removal >> Bulb

Lamp, License Plate: Removal: Bulb

Fig 1: Bulb & Socket
GC0144690Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the license plate lamp from the rear fascia. Refer to LAMP, LICENSE PLATE, REMOVAL .
  3. Pull the base of the bulb (2) straight out of the socket (1).
scientia non olet · About LEMON Manuals