Cover, Seat Back, Front: Removal: Removal

Fig 1: Handles & Shields

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, WARNING .
Remove the front seat. Refer to SEAT, FRONT, REMOVAL .
Remove the lumbar and recliner handles (1).
Remove the screws and remove the side shields (2).

Fig 2: Buckle
Courtesy of CHRYSLER GROUP, LLC
Remove the belt buckle.

Fig 3: Back Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the seat back bolts from both sides.

Fig 4: Removing/Installing Head Rest
Courtesy of CHRYSLER GROUP, LLC
Push in the buttons on both headrest sleeves, pull the headrest up and remove.

Fig 5: J-Straps
Courtesy of CHRYSLER GROUP, LLC
Separate the j-straps (1 AND 2) and pull cover up over frame and remove cushion.
Pinch both headrest sleeve ribs from inside the seat back frame with pliers or equivalent.
Strike the bottom of the sleeve with a rubber mallet or equivalent, and remove the headrest sleeves.