LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lamps/Lighting - Interior (Service Information) >> Lamp, Trunk >> Removal >> Bulb

Lamp, Trunk: Removal: Bulb

Fig 1: Exit Lamp Unit, Bulb Holder & Bulb
GC0144935Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the trunk lamp unit (1) from the right or left trunk trim panel. Refer to LAMP, TRUNK, REMOVAL .
  3. Gently press the movable bulb holder (4) and the bulb (3) towards the fixed bulb holder (2) far enough to disengage the wire loop terminal of the bulb from the hook of the fixed bulb holder.
  4. Disengage the wire loop terminal of the bulb from the hook on the movable bulb holder.
  5. Remove the bulb from the lamp.
scientia non olet · About LEMON Manuals