LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lamps/Lighting - Interior (Service Information) >> Lamp, Entry And Exit >> Removal >> Lamp

Lamp, Entry And Exit: Removal: Lamp

Fig 1: Rear Door Trim Panel, Lens, Door Wire Harness Connector & Connector Receptacle
GC0144936Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Using a trim stick or another suitable flat wide-bladed tool, gently pry the forward (notched) edge of the entry and exit lamp (also known as the puddle lamp) lens (2) down from the mounting hole in the lower horizontal surface of the front or rear door trim panel (1).
  3. Disconnect the door wire harness connector (4) from the connector receptacle (3) integral to the lamp housing.
  4. Remove the lamp from the vehicle.
scientia non olet · About LEMON Manuals